MENDER PRO

A highly elastic leather restoration product for versatile filling repairs.

🛠 Directions 

1. First, clean the area to be restored by wiping the surface with a leather cleaner, then dry it using a hair dryer. If necessary, tidy the surrounding area using scissors, sandpaper, or similar tools.

2. In the case of a leather defect with a hole, attach a repair backing to the reverse side using water-based glue.

3. Use a tool to evenly fill the defect with leather mender. If necessary, mix a small amount of leather pigment (less than 10%) to adjust the color before filling.

4. Wipe off any mender on the surrounding area before it sets. Due to its excellent elasticity, natural drying is recommended. If using a hair dryer depending on the situation, it is recommended to allow the first 10 minutes to dry naturally before using the dryer.

5. Due to the nature of water-based products, the filled areas may settle after drying. The wider and deeper the damaged area, the more it will sink, requiring refilling after drying. In cases such as sofas or car seats with hollow interiors, internal sponges may continue to absorb the product, causing further settling. It is recommended to initially fill a small amount of water-based glue or mender, dry it with a hair dryer to form a thin layer, and then repeat the filling process. After drying, sanding can be performed if necessary, including wet sanding.

6. If coloring is required, use pigment(TUP) to apply the color. After all work is completed, allow it to dry thoroughly, then finish with a leather protector.