WHITE SPORT

High-coverage, high-adhesion dye designed specifically for outsoles.

This is an outsole-specific dye with excellent covering power and adhesion. It can be used immediately without additives and is also suitable for use on the shoe upper (leather). After drying, finish with Fenice Patagonia. If necessary, color mixing with Fenice Touch up pigment(TUP) is also possible.

🛠 Directions 

1. Before use, thoroughly clean the outsole. A high-cleaning-strength cleaner(Clear Cleaner) is recommended. For the outsole area, cleaning should be performed instead of sanding.

2. After cleaning, apply the product using a sponge, brush, or, if necessary, a spray gun. During application, promptly wipe away any unnecessary runs or excess using a clean cloth or cotton swab.

3. Although the drying time is relatively fast, when applying multiple coats, it is recommended to allow approximately 1 hour of drying from the third coat onward before proceeding with the next application. After the final application, allow approximately 12 hours for drying.

4. If necessary, the color can be adjusted by mixing a very small amount of TUP or HCC. When used on the outsole, no additional coating process is required. When used on leather (upper part), a top coat may be applied. If the re-dyed outsole comes into contact with contaminants, cleaning with a strong detergent may cause partial removal of the dyed area. Light everyday stains can be removed; however, applying excessive force or rubbing intensively on a specific area is not recommended.

⚠ Precautions

1. Avoid freezing during storage and store at room temperature (5–40°C).

2. Store in a cool, dry, and well-ventilated place.

3. Be sure to close the lid tightly after use.

4. Keep out of reach of children.

5. Avoid contact with eyes and skin. In case of contact, rinse thoroughly with water.

6. Do not ingest the product.

7. Wash hands thoroughly after use.